Struct Take 

pub struct Take<T> { /* private fields */ }

Reader adapter which limits the bytes read from an underlying reader.

This struct is generally created by calling take on a reader. Please see the documentation of take for more details.

Implementations

impl<T> Take<T>

pub fn limit(&self) -> u64

Returns the number of bytes that can be read before this instance will return EOF.

Note

This instance may reach EOF after reading fewer bytes than indicated by this method if the underlying Read instance reaches EOF.

Examples

use std::io;
use std::io::prelude::*;
use std::fs::File;

fn main() -> io::Result<()> {
    let f = File::open("foo.txt")?;

    // read at most five bytes
    let handle = f.take(5);

    println!("limit: {}", handle.limit());
    Ok(())
}

pub fn position(&self) -> u64

🔬This is a nightly-only experimental API. (seek_io_take_position)

Returns the number of bytes read so far.

pub fn set_limit(&mut self, limit: u64)

Sets the number of bytes that can be read before this instance will return EOF. This is the same as constructing a new Take instance, so the amount of bytes read and the previous limit value don’t matter when calling this method.

Examples

use std::io;
use std::io::prelude::*;
use std::fs::File;

fn main() -> io::Result<()> {
    let f = File::open("foo.txt")?;

    // read at most five bytes
    let mut handle = f.take(5);
    handle.set_limit(10);

    assert_eq!(handle.limit(), 10);
    Ok(())
}

pub fn into_inner(self) -> T

Consumes the Take, returning the wrapped reader.

Examples

use std::io;
use std::io::prelude::*;
use std::fs::File;

fn main() -> io::Result<()> {
    let mut file = File::open("foo.txt")?;

    let mut buffer = [0; 5];
    let mut handle = file.take(5);
    handle.read(&mut buffer)?;

    let file = handle.into_inner();
    Ok(())
}

pub fn get_ref(&self) -> &T

Gets a reference to the underlying reader.

Care should be taken to avoid modifying the internal I/O state of the underlying reader as doing so may corrupt the internal limit of this Take.

Examples

use std::io;
use std::io::prelude::*;
use std::fs::File;

fn main() -> io::Result<()> {
    let mut file = File::open("foo.txt")?;

    let mut buffer = [0; 5];
    let mut handle = file.take(5);
    handle.read(&mut buffer)?;

    let file = handle.get_ref();
    Ok(())
}

pub fn get_mut(&mut self) -> &mut T

Gets a mutable reference to the underlying reader.

Care should be taken to avoid modifying the internal I/O state of the underlying reader as doing so may corrupt the internal limit of this Take.

Examples

use std::io;
use std::io::prelude::*;
use std::fs::File;

fn main() -> io::Result<()> {
    let mut file = File::open("foo.txt")?;

    let mut buffer = [0; 5];
    let mut handle = file.take(5);
    handle.read(&mut buffer)?;

    let file = handle.get_mut();
    Ok(())
}

Trait Implementations

impl<T> BufRead for Take<T>

where T: BufRead,

fn fill_buf(&mut self) -> Result<&[u8], Error>

Returns the contents of the internal buffer, filling it with more data, via Read methods, if empty.

fn consume(&mut self, amt: usize)

Marks the given amount of additional bytes from the internal buffer as having been read. Subsequent calls to read only return bytes that have not been marked as read.

fn has_data_left(&mut self) -> Result<bool, Error>

🔬This is a nightly-only experimental API. (buf_read_has_data_left)

Checks if there is any data left to be read.

fn read_until(&mut self, byte: u8, buf: &mut Vec<u8>) -> Result<usize, Error>

Reads all bytes into buf until the delimiter byte or EOF is reached.

fn skip_until(&mut self, byte: u8) -> Result<usize, Error>

Skips all bytes until the delimiter byte or EOF is reached.

fn read_line(&mut self, buf: &mut String) -> Result<usize, Error>

Reads all bytes until a newline (the 0xA byte) is reached, and append them to the provided String buffer.

fn split(self, byte: u8) -> Split<Self>

where Self: Sized,

Returns an iterator over the contents of this reader split on the byte byte.

fn lines(self) -> Lines<Self>

where Self: Sized,

Returns an iterator over the lines of this reader.

impl<T> Debug for Take<T>

where T: Debug,

fn fmt(&self, f: &mut Formatter<'_>) -> Result<(), Error>

Formats the value using the given formatter.

impl<T> Read for Take<T>

where T: Read,

fn read(&mut self, buf: &mut [u8]) -> Result<usize, Error>

Pull some bytes from this source into the specified buffer, returning how many bytes were read.

fn read_buf(&mut self, buf: BorrowedCursor<'_>) -> Result<(), Error>

🔬This is a nightly-only experimental API. (read_buf)

Pull some bytes from this source into the specified buffer.

fn read_vectored(&mut self, bufs: &mut [IoSliceMut<'_>]) -> Result<usize, Error>

Like read, except that it reads into a slice of buffers.

fn is_read_vectored(&self) -> bool

🔬This is a nightly-only experimental API. (can_vector)

Determines if this Reader has an efficient read_vectored implementation.

fn read_to_end(&mut self, buf: &mut Vec<u8>) -> Result<usize, Error>

Reads all bytes until EOF in this source, placing them into buf.

fn read_to_string(&mut self, buf: &mut String) -> Result<usize, Error>

Reads all bytes until EOF in this source, appending them to buf.

fn read_exact(&mut self, buf: &mut [u8]) -> Result<(), Error>

Reads the exact number of bytes required to fill buf.

fn read_buf_exact(&mut self, cursor: BorrowedCursor<'_>) -> Result<(), Error>

🔬This is a nightly-only experimental API. (read_buf)

Reads the exact number of bytes required to fill cursor.

fn by_ref(&mut self) -> &mut Self

where Self: Sized,

Creates a “by reference” adaptor for this instance of Read.

fn bytes(self) -> Bytes<Self>

where Self: Sized,

Transforms this Read instance to an Iterator over its bytes.

fn chain<R>(self, next: R) -> Chain<Self, R>

where R: Read, Self: Sized,

Creates an adapter which will chain this stream with another.

fn take(self, limit: u64) -> Take<Self>

where Self: Sized,

Creates an adapter which will read at most limit bytes from it.

impl<T> Seek for Take<T>

where T: Seek,

fn seek(&mut self, pos: SeekFrom) -> Result<u64, Error>

Seek to an offset, in bytes, in a stream.

fn stream_len(&mut self) -> Result<u64, Error>

🔬This is a nightly-only experimental API. (seek_stream_len)

Returns the length of this stream (in bytes).

fn stream_position(&mut self) -> Result<u64, Error>

Returns the current seek position from the start of the stream.

fn seek_relative(&mut self, offset: i64) -> Result<(), Error>

Seeks relative to the current position.

fn rewind(&mut self) -> Result<(), Error>

Rewind to the beginning of a stream.